@ UNIVERSAL THROTTLE CABLE (TRX90) (XR/CRF50) 1/22C (AFTCB110049)

THE OUTTER CABLE MEASURES 1000MM/39 3/16" INCLUDING THREADS

THE INNER CABLE MEASURES 1125MM/44 1/4" INCLUDING ENDS

BOTH MEASUREMENTS ARE WITH ADJUSTER COMPLETELY CLOSED.

THIS CABLE HAS AN INLINE CABLE ADJUSTER !!!!

THIS HAS A 10MM THREADED END TO THE THROTTLE TWIST, OR THUMB THROTTLE HOUSING, WHICH IS THE SAME AS THE TRX90 HAS , THIS CABLE IS ABOUT 3" LONGER THAN A STOCK TRX90 THROTTLE CABLE WITH A LOT LONGER INNER CABLE LENGTH,, YOU WILL NEED TO USE ONE OF OUR "END" NIPPLES AND SHORTEN THE INNER CABLE BY 1 1/4" TO USE WITH AN AFTERMARKET CARB AND THE THUMB CONTROL.

@ SOLDER_ON_INNER THROTTLE_CABLE 1/20W (END) (359E)

FOR SHORTINING INNER CABLE LENGTHS

OR SHORTING THE OUTER CABLE TOO

@ SIDE PULL UNIVERSAL THROTTLE ASSY 7/8" BARS 7/18P (AFT209H)

I have found that this is the best universal twist throttle to be used on the two-part handlebars, that have the brake lever perch Welded to the bar. The throttle cable is fairly long so you may have to shorten it. To do so you may need one of the Solder on small brass barrels listed below on this page.