@ e MANIFOLD - DRILL HOLES (OR DREMMEL) (SO IT CAN TWIST 20°)<p>AND IT CAN WORK ON CT200'S (WITH CT90K0 AIR TUBE) & (SIDE DRAFT CARBS) (300001.5)

THIS WILL ADAPT THE 48MM CARB FLANGE CARBS TO THE CT200'S IF YOU DRILL OUT THE HOLES JUST A LITTLE BIT BIGGER. NEW = (313H MAY WORK BETTER)

THIS WILL NOT WORK ON THE CT90'S AS THIS HAS TOO NARROW OF MANIFOLD TO HEAD BOLT PATTERN!!!!!



@ MANIFOLD (48MM_ON_CARB) (50/70_HEADS) (ABOUT_20MM_ID) 1/20M (313H) 313H	@ MOLDED_HOSE WORKS_GOOD_FOR AIR_HOSE_ON CT90K0_CM91 1/22S (HOSE1) (S1260) HOSE1 (S1260)	@ NEW QUALITY TAIWAN CLOSE COPY OF THE ORIGINAL CARB (CT90K2_TO_1977) (ALL_ATC90) CAN_REPLACE_READ OEM # 16100-918-004 16037-077-004 1/20T (S1217) S1217	@ SOLDER_ON_INNER THROTTLE_CABLE 1/20W (END) (359E) END (359E)	@ IT WILL LOOK CLOSE TO THIS CT90K0 THEN	@ IF FORWARD SWINGS 20° RIGHT IF BACKWARD 20° LEFT



@ SOME MEASUREMENTS FOR THIS MANIFOLD	@ CT200 HEAD INTAKE BOLTS PARALLEL WITH HEAD SERFACES	@ *GASKET INTAKE_TO_HEAD CT70KO_to_1977 ALL_SL/XL70'S (all_CT110's) (CT200?)7/20M (31B) 31B	@ CARB_INSULATOR NEW_ORING_TYPE CT90_70_TO_79 ATC90_READ others_too 48mm_C/C 20.5mm_CENTER (300008) 300008	@ e ."O_RING" FOR CARB FLANGE TO MANIFOLD ALL_TRX90 CT90_78_TO_79 FITS_300008 INSOLATOR 1/22P (223H/1004E) 223H/1004E	THIS IS WHAT THE BUSHING LOOKS LIKE ON A STOCK CARB



@ OUR TAIWAN MADE ST90 ATC90 CT90 ATC70 CARBS MAIN JET PICK YOUR SIZE BDAY/MAIN/JETSPICK_SIZE_HERE: