Click to enlarge

The engine in this picture is a 120 lifan monstor motor 

that has been bored out to 58 mm, Which makes it a 146cc Psycho Engine.  


  And our Z40 camshaft. 

this head comes with 27mm and 23mm valves compaired to the 

TRX's 23mm and 20mm valves. 

It will hurt you, I found that out.

I'm using this picture just because I was trying to put this in A CT90. THIS AND ANY OF THE ENGINES WE SELL WILL JUST BOLT RIGHT INTO THE TRX90'S..

THE STOCK CARB AND MANIFOLD WILL BOLT ON.

THE CARBS THAT COME WITH THE NEW ENGINES WILL ALSO BOLT TO THE STOCK MANIFOLD.

THE MAIN ISSUES WITH THE TRX90 ENGINE SWAP, IS THE PULL START.

also THE CARB AND INTAKE IF YOU NEED A BIGGER CARB AND MANIFOLD WOULD BE AN ISSUE.

IF YOU WERE TO WANT A Psycho Engine JUST ORDER ONE OF EACH ITEM BELOW....



Click to enlarge
@ LF120/138/140 LIFAN/ZONGSHEN BORE_COPPER HEAD_GASKET
@ e HEAVY_DUTY VALVE_SPRINGS WITH_WIDER COIL_SPACING FOR_HI_LIFT_CAMS IN_50_70_HEADS (GREAT_STOCK_REPLACMENT) (S1129)
@ STOCK_TYPE ATC185/200 REPLACEMENT_CARB MADE_BY_SHENG_WEY  HAS_48MM_SPACING (300016) 26MM (S1432)
@ BORED OUT TO 58MM NO SKIRT LEFT ON CYLINDER

@ LF120/138/140 LIFAN/ZONGSHEN BORE_COPPER HEAD_GASKET

@ e HEAVY_DUTY VALVE_SPRINGS WITH_WIDER COIL_SPACING FOR_HI_LIFT_CAMS IN_50_70_HEADS (GREAT_STOCK_REPLACMENT) (S1129)

@ STOCK_TYPE ATC185/200 REPLACEMENT_CARB MADE_BY_SHENG_WEY HAS_48MM_SPACING (300016) 26MM (S1432)

@ *CARB_INSOLATOR GASKET CT90K2_TO_79 ALL_ATC90'S ST90'S (TRX90_TO_05)<P>48MM_SPACING 19MM_CENTER_ID 16201-077-306 1/22M (37B)
@ *GASKET INTAKE_TO_HEAD CT70KO_to_1977 ALL_SL/XL70'S (all_CT110's) (CT200?)7/20M (31B)
@ UNIVERSAL THROTTLE CABLE (TRX90) (XR/CRF50) 1/22C (AFTCB110049)
@  "BEST" CLUTCH_CABLE FOR UNIVERSAL LEVER/BRACKET AND MANUAL CLUTCH KIT (FRONT_MID_ARM) 1/22W (0036) 230Z
@ *CARB_INSOLATOR GASKET CT90K2_TO_79 ALL_ATC90'S ST90'S (TRX90_TO_05)

48MM_SPACING 19MM_CENTER_ID 16201-077-306 1/22M (37B)

@ *GASKET INTAKE_TO_HEAD CT70KO_to_1977 ALL_SL/XL70'S (all_CT110's) (CT200?)7/20M (31B)

@ UNIVERSAL THROTTLE CABLE (TRX90) (XR/CRF50) 1/22C (AFTCB110049)

@ "BEST" CLUTCH_CABLE FOR UNIVERSAL LEVER/BRACKET AND MANUAL CLUTCH KIT (FRONT_MID_ARM) 1/22W (0036) 230Z

@ *SHIFT_SHAFT_SEAL ATC90 ATC110 ATC125M 71_TO_85 &_NEUTRAL_INDICATOR SHAFT_SEAL<P>TRX90 ALL_ATC70'S ALL_TRX70'S 11.6x19x6 91204-HB2-003 7/21M (83D)
Click to enlarge
@ *SHIFT_SHAFT_SEAL ATC90 ATC110 ATC125M 71_TO_85 &_NEUTRAL_INDICATOR SHAFT_SEAL

TRX90 ALL_ATC70'S ALL_TRX70'S 11.6x19x6 91204-HB2-003 7/21M (83D)

@ NEEDED TO SWAP PULL START FROM OLD ENGINE...