Click to enlarge

SORRY NO RETURNS,, BECAUSE SOME not all OF these all have arived with small packing scratches on the top, no dents , just small scratches. WE CAN'T TELL IF THEY DO OR DONT WITHOUT UNWRAPPING THEM, SO ONLY BUY IF YOUR A GAMBLER (: honda sent then in white wrap only and they touched each other, as they come 10 in a box... me not happy !!

THIS IS OEM HONDA !

I'M NOT 100% SURE, BUT I THINK THIS WOULD BOLT UP TO THE 1980 TO 1994 USA CT70 FRONT FORK LEGS TOO,, IF A GUY WANTED TO BE DIFFERENT ??

@ *LOW_MOUNTED CHROME_FENDER ST70/DAX NEW_BUT_DAMAGED READ_DISCRIPTION WELL_!! 1/20M 61100-126-650 (S1162) S1162

@ *MUD_GUARD OEM_HONDA_PART BUT_SOLD_AS A_TRICK_ADD_ON FOR_CT70'S FRONT/REAR 61105-126-920 1/22M (263G)@ *MUD_GUARD OEM_HONDA_PART BUT_SOLD_AS A_TRICK_ADD_ON FOR_CT70'S FRONT/REAR 61105-126-920 1/22M (263G)THESE FLAPS LOOK GREAT ON THE CT70'S AND WILL KEEP MUD AND WATER OFF YOUR ENGINE AND "YOU" !! , BUT,, YOU WILL HAVE TO DRILL SOME HOLES AND DEAL WITH A SUPPORT BRACE ON THE BOTTOM OF THE REAR FENDER (see_bottom_picture),, BUT OH MAN IT WILL BE WORTH THE EXTRA EFFORT

I BELEAVE THE CORRECT ORDER IS THE STAY AND MUDFLAP BELOW THE FENDER THEN ON TOP IS THE 3 SCREW/WASHERS POINTING DOWN

FOR EACH FENDER YOU WILL NEED ONE FLAP ONE STAY (now discontinued sorry) AND 3 SCREW/WASHERS (263U)

263G
@ *STAY_BOTTOM, FRONT AND REAR MUD GUARD (61106-126-920) EXED SORRY DISCONTINUED@ *STAY_BOTTOM, FRONT AND REAR MUD GUARD (61106-126-920) EXED SORRY DISCONTINUEDTHIS STAY IS TO BE USED WITH OUR 260G MUD FLAP

THESE FLAPS LOOK GREAT ON THE CT70'S , BUT YOU WILL HAVE TO DRILL SOME HOLES AND DEAL WITH A SUPPORT BRACE ON THE BOTTOM OF THE REAR FENDER,, BUT OH MAN IT WILL BE WORTH THE EXTRA EFFORT

@ *SCREW_WASHER 6X10mm (SOLD_EACH) 93891-06010-00 1/22A (263u) @ *SCREW_WASHER 6X10mm (SOLD_EACH) 93891-06010-00 1/22A (263u) SCREW WASHER 6X10mm THESE ARE MAINLY FOR OUR 263G MUD GUARDS,, BUT ARE VERY SHINY AND WILL FIT MOST ANYWHERE YOU NEED A 6MM SCREW

263u
@ **CABLE_GUIDE FRONT_FENDER K0_TO_78_CT70 1/20M (36G) @ **CABLE_GUIDE FRONT_FENDER K0_TO_78_CT70 1/20M (36G) THIS SCREWS ONTO THE FRONT FENDER TO KEEP THE FRONT BRAKE AND SPEDO CABLE IN LINE. IT FITS K0 THRU 78. IF YOU NEED THE SCREW AND WASHERS TO PUT IT ON SCROLL DOWN AND YOU WILL SEE THEM ON THIS PAGE.

36G
@ *PAN_HEAD_SCREW 5MM_X_12MM 5_x_12 93500-05012-0A 1/22M (B47L)@ *PAN_HEAD_SCREW 5MM_X_12MM 5_x_12 93500-05012-0A 1/22M (B47L)5 X 12 MM PAN HEAD SCREW. OEM HONDA WORKS ON LOTS OF DIFFERENT APPLICATIONS. LIKE MUD FLAPS, FENDER CABLE GUIDES, HEAD LIGHT RIMS , HEAT SHIELDS ETC.

B47L
@ *5MM_WASHER (CABLE_GUIDE) (CLUTCH_PLATE) SCREW 90483-041-000 1/20A (R2085) @ *5MM_WASHER (CABLE_GUIDE) (CLUTCH_PLATE) SCREW 90483-041-000 1/20A (R2085) THIS IS A SPECIAL CHROME LOOKING WASHER, WIDER THAN A NORMAL 5MM FLAT WASHER. IT IS STOCK ON THE CT70 FOR THE CABLE GUIDE SCREWS.

R2085