@ CDI_CONVERSION_KIT FOR_FOUR_SPEED TRANNY_MODELS (400073) EXED SORRY DISCONTINUED

THIS WILL NOT WORK ON 50'S AND 70'S

WITH ORIDGINALLY EQUIPPED

(POINTS AND 3 SPEED TRANNY COMBO'S)

IT WILL WORK WITH 70'S

WITH ORIDGINALY EQUIPPED

(POINTS AND 4 SPEED COMBO') BUT!! YOU WILL NEED TO GRIND

ON THE CENTER CASE SO THE PICKUP UNIT WILL CLEAR, AND !!

GRIND ON THE FLYWHEEL COVER OR GET A CDI TYPE COVER (SEE BELOW)

_________________________________________________________

WORKS ON ATC70 BUT YOU HAVE TO DO MACHINE WORK SEE PICTURES AT

BOTTOM OF PAGE (I MAY TRY TO GET SOME DONE) SOME DAY

THIS KIT IS FOR OLDER HONDA 70'S THAT HAVE THE 4 SPEED TRANMISSION, WHICH THEN ALSO HAD A LONGER LEFT SIDE CRANK SHAFT SPINDLE. AND THE SMALLER POINT TYPE CONE/TAPERED END ON THE FLYWHEEL SIDE OF CRANK TOO.

THIS STATOR, FLYWHEEL AND CDI IS ADVANCED AND HAS NO REV LIMITER.

YOU MAY ALSO WANT TO GET A SUB-W-1 WIRE HARNESS (SOLD SEPERATE) AND A VOLTAGE REGULATOR 6 OR 12 VOLT EITHER WILL WORK WITH THIS STATOR

!!!!THIS "WILL NOT" WORK WITH THE 3 SPEED 50'S AND 70'S



@ 400072 & 400073 wires to SUB-W-1 instructions	@ INSTRUCTIONS FOR INSTALLING 400073 CLICK HERE #	@ HELP FOR CORRECT WIRING OF MOST CDI UNITS	@ e ENGINE_SWAP_WIRING INSTALLING_A_CDI ENGINE_IN_POINTS TYPE_BIKE CT70K0_to_76 all_Z50A_MODELs (SUB_W_1) (S1256)	@ 12V_or_6V CT70 REGULATOR RECTIFIER_PIGTAIL CLICK FOR_INSTRUCTIONS (SUB_W_12/12/6/6) (S1255)



@ 6_VOLT REGULATOR RECTIFIER CONVERTS_12V CLONE_ENGINES TO_6_VOLT!! KEEP_ORIGINAL LIGHTS_BATTERY (6V_reg_rec) (S1249)	@ CDI_TYPE FLYWHEEL_COVER ANY_CDI_HONDA CRF50_CRF70 CT70_Z50R LIFAN_50_TO_150 11411/1P47FMD (1003A)	@ 1	@ 2	@ 3



@ 4	@ 5