@ ST90_LIFT_KIT_?? WH_WH_WHAT_?? COMPLETE_NEW SUSPENSION

WITH THIS KIT YOU GET THE FIRST 4 ITEMS LISTED BELOW ON THIS PAGE.

1. FORK SET SEALED AND READY TO GO.

2. NEW STOCK HONDA SWIPERS

3. NEW LONGER HEAVY DUTY SHOCK SET FOR THE REAR

4. NEW LOWER RUBBER SHOCK BUSHINGS TO ADAPT THE REAR SHOCKS OVER

THIS KIT WILL LIFT THE FRONT END ABOUT 2" AND THE REAR ABOUT 1" IT ALSO ADDS A BUNCH MORE TRAVEL AND EXTRA LOAD CARRING CAPACITY

THE BIKE WILL LEAN FURTHER TO THE LEFT WHEN ON SIDE STAND, SO YOU MAY WANT TO GET A BLOCK TO HELP IF IN SAND OR DIRT



@ FORK ASSEMBLEY SET ST90 HIGH LIFT/CAPACITY BARE/FORK/ASSY/SET	@ 27MM FORK TUBE SWIPER (SOLD_EACH) SHOULD WORK FOR SL70 XL70 XL75 XR75 XL80 XR80 ALL_ST90'S (S1101) S1101	@ CT90_CT110 CHROME_SPRING REAR_SHOCKS APPROX_30% STIFFER_THAN OEM_CT90_SHOCKS) (SET_OF_2_SHOCKS) (CT70_CL70_XXL_DUTY) (1983_C70_XXL_DUTY) 1/17I (CT9/CHR/SH) CT9/CHR/SH	@ *SHOCK ABSORBER BUSHING (CT70K0_TO_1977_UPPER) (ALL_CT90_UPPER) (ALL_CT110_UPPER) (FL250_1977_TO_80_UPPER) (C70M_C70K1_UPPER) (CL70_ALL_UPPER) (CA100_CA102_CA105T_UPPER) (CM91_CT200_UPPER) (SL70_READ) 52495-098-000 1/22M (28R) 28R



@ REMOVE BOTTOM STEEL COLLARS FROM OLD SHOCKS REMOVE BOTTOM STEEL AND RUBBER BUSHINGS FROM NEW SHOCKS THEN ADD THE 28R BUSHINGS AND THE ORIGINAL STEEL COLLARS INTO THE BOTTOM OF THE NEW SHOCKS	@ ANOTHER ANGLE	@ THE CHROME REAR SHOCKS LOOK LIKE THEY COULD HAVE BEEN STOCK	@ CLEARS THE STOCK TAIL PIPE NICELY



@ THE TOP END, NO OIL WILL LEAK OUT OF THIS ONE, AND YOU WILL GET A NEW CHROME FLANGED BOLT (WHEN CHAINGING OIL 3.2 OZ PER SIDE)	@ THERE IS THAT NEW SEAL WITH THE NEW KEEPER ON THE NEW FORK TUBE IN THE NEW LOWER LEG (:	@ FANCY CHROME FLANGE BOLT FOR THE TOP	@ 32" LONG SPEEDO CABLE FOR BIKES WITH THE SCREW LOCK FRONT HUB (ST90'S_READ) 7/21M (338J) 338J



@ *BLACK_SPEEDOMETER CABLE_33.5"_LONG (ST90'S_READ) 1/22M (311N) 311N