NO LONGER AVAILABLE FROM DRATV @ ATC70_ATC90 POLISHED ALLOY_WHEELS DOUGLAS_8"X8" 3_ON_100mm BOLT_PATTERN (4"/4"_OFFSET) (SOLD

THESE ARE 4 X 4 NO OFFSET,,, SO THE RIM CENTER IS JUST THAT

*

THESE WILL WORK ON FRONT OR REAR OF THE ATC'S

YES!!!! THESE WORK WITH THE STOCK ATC70 AND ATC90(NON BALLOON TIRE) HUBS

*

NOW ATC70 OWNERS,, YOU MAY HAVE FENDER CLEARANCE ISSUES WITH SOME/MOST 8" TIRES,,

SO YOU MAY HAVE TO DO SOME ALTERING/FENDER RISING.

*

THESE ARE .125" THICK, BUT .25" IN CENTER

NOTE!!!

THESE ARE 8" WHEELS AND A STOCK ATC70 IS 7" SO 7" ATC70 TIRES WILL NOT WORK WITH THESE...

THESE ARE THE SAME AS THE ATC90 WHEELS, BUT THE OEM HONDA ATC90 TIRES HAVE A BEAD THAT MUST USE A 2 PART WHEEL AND THESE ARE ONE PEICE... ALL AFTERMARKET TIRES 8" WILL WORK..

FOR ATC70 OWNERS THESE ARE USED MAINLY TO ADD 8" FLAT TRACK TIRES OR PADDLE TIRES.

FOR ATC90 FRONT WHEEL (BECAUSE OF OFFSET) YOU WILL HAVE TO MODIFY THE HUB SPACERS (CUT SOME OFF ONE SIDE AND ADD IT TO THE OTHER)