CLICK DIAGRAM TO THE LEFT FOR INSTRUCTIONS YOU WILL HAVE TO AT LEAST LOOSEN THE EXHAUST TO GET THE PIVOT PIPE OUT AND REPLACED. OTHER WISE A NEEDLE NOSED VICE GRIP AND FLAT BLADE SHOULD DO IT. YES ! THIS STILL LEAVES THE SIDE STAND INTACT THIS OEM STAND KIT IS 10X BETTER THAN THE AFTERMARKET ONES ME AND 100 OTHER GUYS WERE SELLING. THE FINSISH, WELDS, AND BIGGER FOOT PADS MAKE THIS THE REAL DEAL.... COMES WITH OEM HOOK , BUMPER AND SPRING !! TOO @ *ALL_OEM_HONDA CENTER_STAND_KIT WILL_FIT_ALL C70_PASSPORTS 1/20M (*760CS_ZA_44D_37C_44H) S1052 S1052/KIT/4PART37C: NOLONGERAVAILABLEFROMDRATV PICTURE WITH A CENTER STAND ON NO LONGER AVAILABLE FROM DRATV @ *HOOK FOR SPRING ON CENTER STAND CT90/110 1/22M (37C)THIS HOOK HOLDS THE CENTERSTAND SPRING IN PLACE ON ALL CT90'S AND 110'S 37C @ *SPRING FOR THE CENTER STAND ALL_CT90/110'S 95014-71102 1/22A (44H)REPLACE THE WEAK CENTERSTAND SPRING AND HEAR HOW MUCH QUIETER THE BUMPS ARE. 44H @ *CT90/CT110 CA110_&_OTHERS CENTERSTAND RUBBER BUMPER 95011-62000 1/21A (44D) IF WHEN YOU HIT A BUMP YOU HEAR A CLUNK YOU MAY NEED THIS RUBBER BUMPER IT CHSHIONS THE CENTERSTAND WHEN ITS IN THE UP POSITION. IT MAKES THE METAL TO METAL NOISE GO AWAY. 44D