I think the two items below on this page will work to replace this coil, just needs some mounting help... @ _ "TEC" IGNITION COIL ALL_SL70'S 1/22H SL70COILTHIS HAS 6MM BOLT HOLES AND THEY ARE 60MM CENTER TO CENTER THIS NEW IGN COIL IS MADE BY "TEC" MAKER OF ALL THE ORIGINAL HONDA IGNITION COILS !! SO YOU KNOW THEY ARE THE BEST AFTERMARKET COIL ON THE MARKET. YES IT INCLUDES THE CONDENSOR. PLUG CAP NOT INCLUDED (SORRY) BUT SEE BELOW SL70COIL @ COIL WIRE SPLICER KIT 1/18W (CWsplicerKIT)IF YOUR COIL WIRE IS TO SHORT OR JUST BAD DON'T BUY A NEW COIL. THIS KIT WILL EXTEND YOUR PLUG WIRE UP TO 2 FOOT. YOU CAN PUT THE SPLICER UNDER THE TANK WHERE NO ONE CAN SEE IT. THE PLUG CAP AND THE SPLICER ARE BOTH MADE BY NGK. THIS IS A VERY CLEAN LOOKING, AND WORKING FIX. here is what one of our great customers had to say "Great! Thanks for getting 'em out quickly. BTW, those things are great; I don't redo a bike without them any more. Seems like every coil wire I run into is very dry and brittle out where it's been exposed, but is in pretty decent shape back near the coil. Probably because it's not exposed to sunlight and heat back there. I figure ten bucks for the coil wire kit is cheap insurance rather than running on a 40-year-old brittle coil wire. It's just not worth the trouble to NOT do it. ADW" CWsplicerKIT