  THIS KIT IS BASICLY FOR CUSTOM BIKE BUILDERS BUT CAN BE USED WITH MOST STOCK APPLICATIONS THIS KIT INCLUDES A NO REV LIMIT CDI UNIT, A CDI IGN. COIL AND A WIRE HARNESS THAT SHOULD WORK WITH MOST ALL HONDA CDI ENGINES AND ALSO MOST SMALL HONDA CLONES. COIL BELOW ON THIS PAGE IS WHAT YOU GET WITH THIS KIT THE WIRE COLORS SHOULD BE THE SAME AS MOST ENGINES.. HERE ARE SOME HELPFUL TIDBITS THE BLACK WITH RED STRIPE WIRE GOES TO THE STATOR PRIMARY/EXCITER COIL WIRE. THE BLUE WITH YELLOW WIRE GOES TO THE PICKUP/TRIGGER COIL WIRE ALSO COMING OUT OF THE STATOR. THE SOLID GREEN WIRE SHOULD GO TO THE SOLID GREEN WIRE COMING OUT OF THE STATOR,,BUT NOT THE LIGHT GREEN AND RED WIRE AS THAT IS FOR THE NEUTRAL LIGHT SWITCH ON SOME MODELS. IF YOU DON'T HAVE A SOLID GREEN WIRE COMING OUT OF THE STATOR THEN YOU MUST GO TO GROUND/FRAME WITH THE SOLID GREEN WIRE. THE BLACK WITH YELLOW WIRE GOES TO THE BLACK TERMINAL OF THE IGNITION COIL. THE LIGHT GREEN WITH RED STRIPE,, ONE END GOES TO THE GREEN TERMINAL ON THE IGNITION COIL, AND THE OTHER ENG GOES TO GROUND--(USUALLY ON THE IGNITION COIL MOUNTING BOLT) THE LONG BLACK WITH WHITE STRIPE WIRE IS FOR THE KILL SWITCH. WHEN IT IS GROUNDED IT WILL KILL THE SPARK!! THE YELLOW, WHITE AND SHORT BLACK AND WHITE ARE JUST EXTRA. |
|
 |
FITS_ALMOST_ANY CDI_MODEL BIKE_TRIKE_QUAD 34500/1P47FMD (S1175) |
|