Click to enlarge

335MM EYE TO EYE

MAKE SURE THE STEEL BUSHINGS IN THE TOP EYE OF SHOCKS ARE REMOVED

THEY DON'T GET USED AT ALL ON CT110 AND CT90

THESE SHOCKS ARE ABOUT TWICE (maybe_more) THE SPRING STRENGTH AS THE STOCK SHOCKS. THEY ARE WIDER AT THE TOP THAN THE STOCK SHOCKS SO INCLUDED WITH THEM ARE SOME SPACER WASHERS TO MOVE THE MUFFLER FURTHER AWAY FROM THE RIGHT SHOCK. GO FULL PAGE ON THE PICTURE TO SEE WHERE THE SPACER WASHERS SHOULD BE PUT. THE SPECIAL BOLTS ARE JUST TO SHOW WHERE THE WASHERS GO, THEY ARE NOT INCLUDED

(THE SPECIAL BOLTS ARE ON YOUR BIKE NOW AND CAN BE REUSED)

OTHERWISE THE TOP RUBBER BUSHING LIKES TO HAVE A LITTLE OIL OR GREASE ON IT TO HELP SLIP OVER THE STUD IT FITS OVER AS IT IS A NICE TIGHT FIT. THESE SHOCKS ALSO HAVE 5 SPRING SETTINGS AND A WRENCH SO WHEN YOUR PACKING ALL THAT GOLD OUT YOU CAN CRANK UP THE SPRINGS TO THE MAX :)

@ CT90_CT110 (VERY) HEAVY_DUTY REAR_SHOCK_SET 7/21W (HDSHOCK) HDSHOCK