   HP-MINIS 37 BUCKS WITH SHIPTHIS EXHAUST WILL WORK ON ALL CT70'S , BUT IS MOST CORRECT FOR 1977 THRU 1994 , THESE ARE THE YEARS THAT DON'T USE THE EXTENDER STUD BOLT ON THE TOP REAR SHOCK MOUNT. THESE DON'T USE THE MID MOUNT (A BLESSING MOST OF THE TIME) THEY HAVE THE BAFFLE THAT ARE WELDED IN THE REAR IF YOU ARE GOING TO USE THIS ON THE 1976 AND OLDER YOU MAY WANT TO GET A 10MM CAP/ACORN NUT FOR THE TOP REAR MOUNT. see below on this page. OTHER ITEMS YOU MAY OR MAY NOT NEED FOR INSTALLING THIS SYSTEM ARE LISTED BELOW.... THANKS |
|
 NEED BETTER FLOW FOR AN OVERSIZED ENGINE 85CC OR BIGGER ?Hi,For a 69 dollar exhaust, not bad after mods. The hole drilling job in the rear is not perfect because the surface is not flat due to the fillet weld holding the baffle in place and of course the center baffle is not centered---drill bit walks. It is about 1.5 X as loud now but not objective for me to ride around the neighborhood. I did not rejet the stock carb at all even though 88 cc big bore kit is installed. Thanks for your help DRATV!! Best, Rick |
|
|
 CLICK ON PICTURE FOR MORE INFO |
|
|
 @ 10MM ACCORN/CAP_NUT SOLD_EACH temp out of stock |
|
|
 @ 10MM_FLAT_WASHER F/W_NUT'S_WASHER (SOLD_EACH) 1/21K (273K) |
|
|
 @ _ *EXHAUST DONUT ALLZ50_XR50_CRF ALL_PASSPORT'S CT110_ALL CT70KO to 1982ALL_CT200'S TRX90_ALL LIFANs/CLONES 18291-HB2-900 1/22M (B16C) OEM HONDA PARTTHIS FITS UP IN THE EXHAUST PORT TO SEAL ANY EXHAUST LEAKS. THIS WILL ALSO FIT ALL Z50A'S AND ATC70'S. THESE ARE OEM HONDA PARTS THIS WILL WORK WITH ALL LIFAN, ZONGSHEN, AND JIALING HORIZONAL 50 TO 140CC ENGINES ALSO FITS: SL70 XL70 CL70 TRX70 ATC70 (ATC125M_1984/1985) |
|
|
 @ _6MM NUT 1/22K (B6Z)THIS WILL FIT ON LOTS OF HONDA APPLICATIONS.
LIKE EXHAUST STUDS-CARB STUDS-LEVER BOLTS |
|
|
 @ _ *OEM_HONDA 6MM_LOCK_WASHER 1/20M (B91Z) |
|