I WILL BE RIGHT UP FRONT,, THESE TAKE SOME BENDING/TWEAKING,
OF THE TABS ON THE BACK SIDE OF CHROME RING TO FIT CORRECTLY..
AND THEY SHOW SOME SIGNS OF LONG SHELF LIFE ,, BUT THEY ARE NEW !!
JUST MAKE THE TOP TAB LOOK LIKE THE OLD LIGHT'S AND THE BOTTOM TABS GO UP A TAD...
I NOW BE-LEAVE THIS WILL FIT THE C70K1 AND C70M'S TOO
1980 AND 1981 PASSPORTS ARE STOCK 6 VOLT
1982 AND 1983 ARE STOCK 12 VOLT
SPARE BULBS ARE LISTED BELOW ON THIS PAGE
6 VOLT= 24N AND 12 VOLT = HL113
===================================================
THIS IS A REPLACEMENT HEADLIGHT ASSY THAT HAS JUST A SMALL
REPLACEABLE HEADLIGHT BULB SO WHEN SHE BLOWS FOR WHATEVER REASON YOU ONLY NEED TO SPEND 3 OR 4 BUCKS INSTEAD OF $40 TO 50.
IT DOES USE A DIFFERENT MOUNTING HOLE THAN THE ORIGINAL ASSY. USES BUT THE HOLE IS THERE! ALL YOU NEED TO DO IS SWITCH THE RUBBER PLUG FROM ONE HOLE TO ANOTHER. YOU WILL SEE WHAT I MEAN WHEN YOU LOOK AT YOUR BIKE. ONE OTHER THING THE BLUE WIRE ONLY HAS 1 FEMALE CONNECTOR AND NORMALLY HAS TWO (ONE GOES TO HIGH BEAM INDICATOR) (ONE GOES TO HEAD LIGHT BULB)...., see our TM5 and TM6 LISTED BELOW ON THIS PAGE IF YOU WANT TO KEEP IT LIKE ORIGINAL, OR JUST SPLICE THE ONE FROM YOUR OLD BULB.
M_&_K1'S I THINK THIS WILL WORK BUT YOU MAY WANT TO GET THE 25W 25W BULB
|