   ==============================================================WHAT YOU MUST DO AFTER YOU BUY THIS LISTING: * 1. REMOVE ALL HEAD COVERS, & ALL GUIDE / DOWEL PINS (SEE LOWER PICTURE) * (WE WILL REMOVE THE VALVES) * 2. THERE MUST NOT BE ANY BAD THREADS OR BROKEN STUDS (ESPECIALLY THE SPARK PLUG THREADS) !!!! CHECK CLOSE (WE DON'T REPAIR THREADS) GET THEM FIXED BEFORE SENDING IN THE HEAD ! * 3. THE CAM BEARING SURFACES MUST BE IN GOOD CONDITION WHICH MEANS THE CAMSHAFT SHOULD HAVE VERY LITTLE FREE PLAY INSIDE THE HEAD * 4. ALL GASKET SURFACES MUST BE GOOD GOOD ENOUGH TO SEAL IN OIL AND COMPRESSION * 5. NO BROKEN FINS (OR TELL US BEFORE HAND) * 6. SEND CLOTH WRAPPED / PROTECTED HEAD TO: BEATRICE CYCLE INC. 223 MAIN STREET P.O. BOX 189 ODELL NE 68415 * ============================================================== WHAT WE DO.... * TOTAL DECARBON / DEGREASEING / CHASE PLUG THREADS * COMPLETE INSPECTION * INSTALL NEW VALVE GUIDES, GUIDE O-RINGS * CUT NEW VALVE SEATS * INSTALL NEW VALVES AND SEALS IN & EX * REINSTALL SPRINGS COTTORS AND KEEPERS * CLOTH WRAP IT BACK UP AND SEND IT BACK TO YOUR BILLING ADDRESS ============================================================== |