Click to enlarge

@ ..88CC_BIG_BORE_KIT HIGH_COMPRESSION CT70_THRU_1981 ALL_ATC70_ALL_TRX70 ALL_SL70_XL70_CL70 C70's_thru_1981

WITH THIS KIT YOU WILL GET EVERYTHING IN THE PICTURE. (CYLINDER, HONED AND READY TO GO), (PISTON), (PISTON RINGS), (PISTON PIN), (PISTON PIN CLIPS) AND A (TOP END GASKET SET WITH BIG BORE HEAD GASKET AND VALVE GUIDE SEAL). THE HEAD GASKET IN THIS KIT MAY NOW COME WITH AN OEM TYPE 3 LAYERED METAL . JUST BOLT-ON AND GO.

THIS KIT IS TO BE USED ON CT70'S THRU 1981, (THE 1980 AND 1981 PASSPORT'S) ALL XL70'S SL70'S AND THE C70M C70K1. THIS CAN NOT BE USED WITH A 50CC HEAD. THIS CYLINDER IS 88CC'S

ALSO WILL WORK ON ALL ATC AND TRX70'S

FYI BELOW ON THIS PAGE IS THE REPLACEMENT CYLINDER AND PISTON KIT THAT HELPS MAKE THIS KIT UP.

(S1100/1-42/WEGO/52TOP)

*********************************

*********************************

@ 52MM_PISTON_KIT (OLD_70_DOME) (SHORT_ROD) (SHORT_CYLINDER) (100042) (S1409)@ 52MM_PISTON_KIT (OLD_70_DOME) (SHORT_ROD) (SHORT_CYLINDER) (100042) (S1409)WITH THIS PISTON YOU MUST USE

A HEAD (AND_CRANK) FROM A (CT70 1969 TO 81),(XL,SL,CL OR ATC70) MUST BE USED WITH THIS PISTON KIT!!!!!!!!!!!

OR

OUR OLD_STYLE BARE_HEAD = (OLD_70_DOME)

THIS WILL ONLY WORK IN OUR 52MM BIG CYLINDER

STOCK HONDA CYLINDERS CAN NOT BE BORED OUT THIS BIG!!!!

100042 (S1409)
Click to enlargeCLICK FOR PISTON MEASUREMENTS