Click to enlarge

@ _ "TEC" IGNITION COIL ALL_SL70'S 1/22H SL70COIL

THIS HAS 6MM BOLT HOLES AND THEY ARE 60MM CENTER TO CENTER

THIS NEW IGN COIL IS MADE BY "TEC" MAKER OF ALL THE ORIGINAL HONDA IGNITION COILS !! SO YOU KNOW THEY ARE THE BEST AFTERMARKET COIL ON THE MARKET.

YES IT INCLUDES THE CONDENSOR.

PLUG CAP NOT INCLUDED (SORRY) BUT SEE BELOW

SL70COIL

NO LONGER AVAILABLE FROM DRATV @ NGK RESISTOR SPARK PLUG CAP  LB05F 8051 1/21W  (23D)NO LONGER AVAILABLE FROM DRATV @ NGK RESISTOR SPARK PLUG CAP LB05F 8051 1/21W (23D)THIS IS THE SAME TYPE OF CAP THAT ALL CT'S CAME WITH FROM THE FACTORY. IT WILL HELP TO REDUCE RADIO INTERFERENCE.

23D
@ NON RESISTOR SPARK PLUG CAP LZFH 7/20W (B_CAP)@ NON RESISTOR SPARK PLUG CAP LZFH 7/20W (B_CAP)THIS IS A NGK PLUG CAP THAT IS NON RESISTOR IT WILL WORK ON ALL CT'S Z'S AND ATC'S

B_CAP
@ COIL WIRE SPLICER KIT 1/18W (CWsplicerKIT)@ COIL WIRE SPLICER KIT 1/18W (CWsplicerKIT)IF YOUR COIL WIRE IS TO SHORT OR JUST BAD DON'T BUY A NEW COIL. THIS KIT WILL EXTEND YOUR PLUG WIRE UP TO 2 FOOT. YOU CAN PUT THE SPLICER UNDER THE TANK WHERE NO ONE CAN SEE IT. THE PLUG CAP AND THE SPLICER ARE BOTH MADE BY NGK. THIS IS A VERY CLEAN LOOKING, AND WORKING FIX.

here is what one of our great customers had to say

"Great! Thanks for getting 'em out quickly.

BTW, those things are great; I don't redo a bike without them any more. Seems like every coil wire I run into is very dry and brittle out where it's been exposed, but is in pretty decent shape back near the coil. Probably because it's not exposed to sunlight and heat back there. I figure ten bucks for the coil wire kit is cheap insurance rather than running on a 40-year-old brittle coil wire. It's just not worth the trouble to NOT do it.

ADW"

CWsplicerKIT