Click to enlarge

*(LAST_RESORT) STEP/FOOTREST NON HINGING SUB FOR DISCONTINUED C70 STEPS 1/17M (309H) temp out of stock

THIS SHOULD WORK WITH THE STOCK TYPE EXHAUSTS ON C70'S

YOU MAY/WILL NEED SOME OR ALL OF THE PARTS LISTED BELOW TOO

THIS FOOT PEG WELDMENT HAS A TOP MOUNTED SPRING FOR THE KICK STAND SO GET THE STAND LISTED BELOW UNLESS YOU CAN DRILL A HOLE ON YOUR OLD KICK STAND AND ADD A BOLT OR THE LIKE

309H$56.95

*SIDE STAND 3/8"_TO_1/2" SHORTER THAN STOCK CT90/CT110 STAND BUT CAN WORK IF UESD WITH 70C SPRING  1/16A 217F*SIDE STAND 3/8"_TO_1/2" SHORTER THAN STOCK CT90/CT110 STAND BUT CAN WORK IF UESD WITH 70C SPRING 1/16A 217FMAKES THE BIKE LEAN A BIT MORE, BUT IF YOU ADD A PAD TO THE

FOOT PAD THAT CAN BE ADJUSTED

217F$27.32
**SPRING KICK STAND Z50 K3 THRU 1978 (MOST_COME_SILVER)  (PASSPORT_80_81) 7/16A (70C)**SPRING KICK STAND Z50 K3 THRU 1978 (MOST_COME_SILVER) (PASSPORT_80_81) 7/16A (70C)OEM HONDA PART

THIS FITS Z50A SOFT TAIL K3 TO 1978

THIS ALSO FITS THE 1980 AND 1981 C70 PASSPORTS

70C$2.65
*RUBBER_STEP (SOLD_EACH)  2/14M (297J)*RUBBER_STEP (SOLD_EACH) 2/14M (297J)RUBBER STEP

297J$7.79
*SIDE_STAND PIVOT_BOLT CT90K3_TO_1979 ALL CT110'S ALL_CT70'S 7/16M (54D) *SIDE_STAND PIVOT_BOLT CT90K3_TO_1979 ALL CT110'S ALL_CT70'S 7/16M (54D) THIS SPECIAL SHOLDERED BOLT WORKS AS THE SIDE STAND PIVOT BOLT ON CT90K3'S THRU ALL CT110'S,

BOLT54D$4.18
*SIDE_STAND SPECIAL LOCK_NUT 10mm CT90K3_TO_79 ALL_CT110 7/17M (54C)*SIDE_STAND SPECIAL LOCK_NUT 10mm CT90K3_TO_79 ALL_CT110 7/17M (54C)THIS NUT IS A SPECIAL THIN SELF LOCKING NUT THAT GOES ON THE SIDE STAND PIVOT BOLT. IT WILL FIT CT90K3 THRU ALL CT110'S.

NUT(54C)$5.98