Click to enlarge

PICK 6_VOLT FOR MOST STOCK BIKES

PICK 12_VOLT FOR BIKES WITH CLONE ENGINES

THIS IS AFTERMARKET BUT WILL REPLACE THE STOCK CT90 K1 MODEL THRU THE CT90K3 MODEL.

========================================================== COLOR OF WIRES ARE A BIT DIFFERENT ON THIS LAST BATCH

THEY GO LIKE THIS:

Green is to Ground, but if the bracket is ground to the rear fender it don't need to be hooked up to anything.

Blue wire goes to Brown / Tail Light Element

White wire goes to (Green W/Yellow Stripe / Brake Light Element ===========================================================



HOWEVER IT WILL ALSO WORK (IF NEEDED)(AS THE PRICE IS RIGHT) ON ALMOST ANY HONDA WHICH HAS THE REAR FENDER AS JUST AN EXTENSION OF THE FRAME, ie STEPTHRU'S CT200 CT90 CT110 (C70-PASSPORTS)CM91 , NOT AS A DIRECT REPLACEMENT, BUT JUST SOMETHING TO PASS MOST ALL INSPECTIONS.

THE LENS REPLACES OEM NUMBER LENS, TAILLIGHT 33702-077-671

TAIL LIGHT AND BRACKET ASSEMBLY ct90k1_to_k3 PICK_6_OR_12V (96J) 96J$21.50YOU_MUST_PICK_6V_OR_12V: 

AFTERMARKET TAIL LENS CT90 K1_TO_K3 CL70K0/K2  (400060) temp out of stockAFTERMARKET TAIL LENS CT90 K1_TO_K3 CL70K0/K2 (400060) temp out of stockTHIS FITS K1 THRU K3 ONLY. (THIS LENS TAKES A 4X50 LENS SCREW)

THE LENS REPLACES OEM NUMBER LENS, TAILLIGHT 33702-077-671

400060$11.99