Click to enlarge

THIS KIT IS FOR PEOPLE WITH EITHER BAD HEADS,, OR WITH TIRED STOCK 47MM BORE ENGINES, THAT HAVE CYLINDERS STILL WITH IN SPEC'S.

IF YOUR CYLINDER IS TOO FAR GONE I HAVE NEW STOCK BORE CYLINDERS LISTED AT THE BOTTOM OF THIS PAGE !

PLEASE READ FITMENTS BELOW CLOSE

*

NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

*

THIS HEAD "MUST" BE USED WITH THE INCLUDED PISTON "ONLY" NO OTHER PISTON DOMES WILL WORK !!

WITH THE LISTED MODELS THAT IS...

*

THIS HAS THE HIGH QUALITY LIFAN "E22" HEAD  !!!

THE HEAD INCLUDES ALL THE PARTS SHOWN IN THE TORN DOWN PICTURE, , BUT FULLY ASSEMBLED (AS MUCH AS POSSABLE) ...THAT PIC IS NOT THE ONE YOU WILL GET,, AS THAT IS OURS FOR DISPLAY, BUT YOURS WILL LOOK LIKE THE FIRST PIC..

--------------------------------------------------------------------------------

STOCK HONDA CRF70 VALVES, GUIDES, SEALS, SPRINGS, KEEPERS, ROCKERS, GASKETS, HEAD COVERS, SPARK PLUG WILL WORK AS DIRECT REPLACEMENT PARTS ON THIS HEAD !!

--------------------------------------------------------------------------------

THIS COMES WITH A STOCK GRIND 70CC LIFAN TYPE CAM...

--------------------------------------------------------------------------------

NOW YOU WILL ALSO GET A NEW STOCK SIZE 70CC PISTON KIT (47MM), AND THE TOP END GASKETS NEEDED TO INSTALL THESE PARTS

--------------------------------------------------------------------------------

THIS HEAD AND PISTON WILL BOLT RIGHT ON THE FOLLOWING MODELS AND WORK JUST LIKE THE ORIGINAL HEAD DID

ALL ATC70'S

ALL TRX70'S

CT70 'S 1969 THRU 1981

ALL XL70 'S SL70 'S CL70 'S

C70 / M 1970 THRU THE 1981 PASSPORT

STOCK CAM'S FROM THE ABOVE LISTED MODELS WON'T INTERCHANGE

VALVE FACE DIAMETER (IN = 23MM) (EX = 20MM)


QUICK_FIX_SPECIAL MOST_OLDER_70CC'S E22_QF_HEAD/1-20/TEGS70$149.99

47MM_BORE (63MM/SHORT) STEEL_CYLINDER  (MARKED_"72cm2'') (100067)
Click to enlarge
47MM_BORE (63MM/SHORT) STEEL_CYLINDER (MARKED_"72cm2'') (100067)

100067Regular price: $39.95Sale price: $29.99
THIS CAM WILL WORK IN THIS HEAD, IF YOU WANT TO GO FASTER ?