Click to enlarge

*OEM_CT90 CARB (CT9CARB) DISCONTINUED ):

OK,,, THIS CARB WILL BOLT RIGHT UP TO THE INTAKE MANIFOLD, AND THE THROTTLE CABLE WILL WORK FINE ON ALL CT90'S FROM THE K2 TO THE 1979 MODEL. HOW EVER, AND MAYBE EVEN A BLESSING YOU MUST USE THE CT110 BOOT THAT GOES FROM THE CARB TO THE AIR BREATHER BOX (WHICH WE DO SELL). JUST USE THE BANDS FROM YOUR CT90 AND THE CT110 BOOT WILL SQUEESE DOWN AND SEAL UP FINE. (78'S AND 79'S DON'T NEED TO DO ANYTHING EXTRA) NOW IF YOU HAVE A CT90K1 YOU MUST FIND A INTAKE MANIFOLD FROM A NEWER CT90, THIS CARB AND STRETCH THE REAR BOOT OVER THE REAR OF THE CARB, AND AWAY YOU GO. THIS CARB IS FOR A CT90 SO YOU SHOULD BE ABLE TO PUT IT ON AND IT WILL RUN LIKE A NEW BIKE. OR AT LEAST IT SHOULD RUN A H--- OF A LOT BETTER THAN WITH THAT OLD CARB..(NOTE) YOU MAY NEED TO USE YOUR OLD CARB'S TOP SET IF YOUR CABLE'S OUTER HOUSING IS KINKED OR STRECHED . THIS NEW TOP SET REQUIRES ABOUT 1/4" MORE INNER CABLE LENGTH THAN THE ONES ON SOME OF THE K2'S & K3'S..

(CT9CARB)