   THIS IS THE CORRECT HEADLIGHT BUCKET FOR CT90K6 THRU 1979 AND ALL CT110'S.HOWEVER I'M SURE IT WILL WORK FOR K4 AND K5 JUST THAT THIS BUCKET IS BLACK. IT CAN BE PAINTED,IT'S NOT ABS PLASTIC. ALSO K2 AND K3 can USE THIS BUCKET, it's just that THE HOLE FOR THE TRIPOMETER WILL BE LEFT OPEN. THIS BUCKET WILL WORK FOR ST90'S BUT YOU'LL NEED TO ADDRESS THE TRIP-O-METER CUT OUT ALSO. SEE BELOW ON THIS PAGE.. THIS HAS THE NUT FOR THE HEADLIGHT ASSY SCREW INSTALLED ALLREADY |
|
 @ WIDE RUBBER SPEEDOMETER_GASKET CT90_CT110_ST90 (90'S_CT70'S) (296B) (S1375)RUBBER SPEEDOMETER GASKET |
|
|
 @ TRIP-O-METER SLOT RUBBER PLUG FOR BIKES THAT DON'T HAVE 1/19M (212W) |
|
|
 @ **GROMMET REAR OF HEADLIGHT_BUCKET FITS_IN_30MM_ID 61302-268-020 7/20M (269R)THIS FITS ROUND HOLES IN THE FRAME OR HEADLIGHT BUCKETS THAT ARE APPROX. 30MM ID.THE ID OF THE GROMET IS THEN 25MM ID. I WOULD USE A TINY BIT OF 3M WEATHER STRIPPING GLUE TOO. PICTURED IS A CT90/CT110 BUCKET |
|
|
 @ *COLLAR, HEADLIGHT CASE 61302-230-620 (296J)CT90K2CT90K3 CT90K4 CT90K5 CT90K6 1976 CT90 1977 CT90 1978 CT90 1979 CT90 1980 CT110 1981 CT110 1982 CT110 1982 CT110 1983 CT110 1984 CT110 1986 CT110 1986 CT110 CA175K3 CA175 CL125A SS125A |
|
|
 @ *NUT/WASHER HEADLIGHT BUCKET 61303-230-620 (CT90K2_TO_1979)(ALL_CT110'S) (1991_TO_1994_CT70) (SOLD_EACH) CT90 CT110 61303-230-620 1/22M (333D) |
|