Click to enlargeSEE #7 AND #8 IN THE DIAGRAM

SOME FILING WILL / MAY BE NEEDED

SEE #7 AND #8 IN THE DIAGRAM

SOME FILING WILL / MAY BE NEEDED



*INSULATOR,  CARB_MANIFOLD TO_HEAD 45MM_X_3MM 1/14M ( 16211-051-307 ) EXED SORRY discontinued
*INSULATOR,  CARB_MANIFOLD TO_HEAD 45MM_X_3MM 1/14M ( 16211-051-307 ) EXED SORRY discontinued

CARB INSULATOR : GOES BETWEEN MANIFOLD AND HEAD

THIS FITS HEADS FROM 50'S 70'S AND TRX90'S

CENTER HOLE IS 22MM

THICKNESS IS 3MM

BOLT SPACING IS 39MM INSIDE TO INSIDE

BOLT SPACING IS 51MM OUTSIDE TO OUTSIDE

HEIGHT IS 38MM

*GASKET INTAKE_TO_HEAD CT70KO/77 ALL_SL/XL70'S (all_ct110's) 1/16M (31B)
*GASKET INTAKE_TO_HEAD CT70KO/77 ALL_SL/XL70'S (all_ct110's) 1/16M (31B)
*GASKET INTAKE_TO_HEAD CT70KO/77 ALL_SL/XL70'S (all_ct110's) 1/16M (31B)

THIS GOES CLOSEST TO THE HEAD ON THE INTAKE SIDE. FITS KO THRU 1977. and all atc70's 22MM CENTER

44MM BOLT PATTERN

ALL HOLES ARE CENTERED

all SL AND XL70'S TAKE 2 ONE ON BOTH SIDES OF THE INSOLATER
*GASKET INTAKE_TO_HEAD CT70KO/77 ALL_SL/XL70'S (all_ct110's) 1/16M (31B) 31B$3.19
*Z50A MANIFOLD INSULATOR (CT90K0_CM91_READ) 1/18M  (207L) temp out of stock
*Z50A MANIFOLD INSULATOR (CT90K0_CM91_READ) 1/18M  (207L) temp out of stock

THIS CAN WORK FOR THE CT90K0 and CM91 CARB TO MANIFOLD IF YOU DO A LITTLE DREMMELING OR FILING

CENTER HOLE IS 17MM

THICKNESS IS 6MM

BOLT SPACING IS 39MM INSIDE TO INSIDE

BOLT SPACING IS 52MM OUTSIDE TO OUTSIDE

HEIGHT IS 38MM
*Z50A MANIFOLD INSULATOR (CT90K0_CM91_READ) 1/18M (207L) temp out of stock 207L$11.89
*GASKET INTAKE_TO_HEAD CT70KO/77 ALL_SL/XL70'S (all_ct110's) 1/16M (31B)
"O_RING" FOR CARB FLANGE TO MANIFOLD ALL_TRX90 CT90_78_TO_79 FITS_300008 INSOLATOR 1/14P (223H/1004E)