Click to enlarge

bolt pattern center to center approx. 42mm

THIS CARB SHOULD RUN GREAT WITH OUT REJETTING AS WE HAVE PRE JETTED IT FOR ALL CT70'S 1969 TO 1977, BUT READ ON!!!!!!!

THIS CARB IS THE SAME AS THE CT70 78 TO 82 EXCEPT WE REJETED IT AND MADE SOME SLIDE NEEDLE ADJUSTMENTS. BUT THERE ARE SOME DIFFERENCES FROM THE ORIDGINAL KO TO 77 CT70 CARB, BUT THIS WILL WORK!!! GREAT!!!!. ALL YOU HAVE TO DO IS KNOTCH YOUR INTAKE MANIFOLD HOLES CLOSER TOGETHER, AS THE BOLT PATTEREN ON THIS CARB IS ABOUT 7MM CLOSER. THIS CARB IS SLIGHTLY SHORTER FROM FRONT TO BACK SO IT FITS BETTER IF YOU GET THE NEW CARB TO AIR CLEANER BOOT AS THIS BOOT IS SLIGHTLY LONGER THAN THE ORIDGINAL ONES ON THE CT70KO THRU 1977.

OR YOU CAN GET THE MANIFOLD (and_needed_accessories) AT THE BOTTOM OF THIS PAGE AND JUST BOLT EVERYTHING UP.

IF YOU NEED BOLTS SEE BELOW ?

*HONDA_OEM_CARB CAN_WORK_FOR 69_TO_77_CT70 (BUT_READ_CLOSE) 42MM_PATTERN 7/17A (CARB70PJ) CARB70PJ$145.99

*INSULATOR CT70 ATC70 TRX70 1978 AND NEWER  HAS_42MM_PATTERN 1/17M (84K)*INSULATOR CT70 ATC70 TRX70 1978 AND NEWER HAS_42MM_PATTERN 1/17M (84K)WORKS FOR CT70 78 TO 82

ATC70 1978 TO 1985

TRX70 ALL

ALSO WORKS ON 1980 AND 81 PASSPORTS

84K$4.20
*GASKET -  INSULATER WORKS WITH 84k  9/14M (83C) *GASKET - INSULATER WORKS WITH 84k 9/14M (83C) WORKS WITH OUR 84K INSULATER

83C$3.19
*PIPE, INLET CT70 INTAKE MANIFOLD 1991_THRU_1994 BUT_???????  42MM_PATTERN  7/17M (212D)*PIPE, INLET CT70 INTAKE MANIFOLD 1991_THRU_1994 BUT_??????? 42MM_PATTERN 7/17M (212D)YOU WILL NEED A 54B TO GO BETWEEN THE HEAD AND MANIFOLD

BUT !!

YOU MAY ALSO NEED TO GET 31L AND 40E INSOLATER AND O-RING TO GO WITH THIS MANIFOLD "OR" 84K and 83C (either set will work) BETWEEN THE CARB AND MANIFOLD

*PIPE, INLET CT70 INTAKE MANIFOLD 1991_THRU_1994 BUT_??????? 42MM_PATTERN 7/17M (212D) 212D$33.85
*INTAKE MANIFOLD ORING 27MM_X_2MM  1/17M  (54B) *INTAKE MANIFOLD ORING 27MM_X_2MM 1/17M (54B)
54B$2.98
N424-74C_IDLE_JET ATC70_1978_&_UP 82_&_83_PASSPORTS  CT70_1978__TO_82 MANY_OTHERS tempN424-74C_IDLE_JET ATC70_1978_&_UP 82_&_83_PASSPORTS CT70_1978__TO_82 MANY_OTHERS tempTHIS ITEM REPLACES SCREW IN JETS ONLY, PRESS IN JETS ARE NOT AVAILABLE

#38_217V #40_266P #42_266Q #45_266R #48_266S #50_266T #52_266U

THIS JET WILL WORK ON THE FOLLOWING:

ATC70_1978_&_UP

C70 82_&_83_PASSPORTS AND OUR PASSPORT REPLACEMENT CARB FOR 1980/81

CT70_1978__TO_94

CT110 1982 THRU 1986

ATC110 1984 AND 1985

N424-74C_IDLE_JET ATC70_1978_&_UP 82_&_83_PASSPORTS CT70_1978__TO_82 MANY_OTHERS temp N424-74C$3.99PICK_JET_SIZE_HERE: 
*OEM_SLOW JET #35  1982 AND 1983 PASSPORTS 1/16M (79Q)*OEM_SLOW JET #35 1982 AND 1983 PASSPORTS 1/16M (79Q)THIS JET WILL WORK ON THE FOLLOWING:

ATC70_1978_&_UP

C70 82_&_83_PASSPORTS AND OUR PASSPORT REPLACEMENT CARB FOR 1980/81

CT70_1978__TO_94

CT110 1982 THRU 1986

ATC110 1984 AND 1985

TRX90'S

ATC125M'S

AND OTHERS

*OEM_SLOW JET #35 1982 AND 1983 PASSPORTS 1/16M (79Q) 79Q$13.19
**BOLT 6MM_X_25MM (SOLD_EACH) 1/17A (B81F) **BOLT 6MM_X_25MM (SOLD_EACH) 1/17A (B81F) FITS MISC. BUT ALSO THE BELOW LISTED ITEMS...

CONNECTS MOST AFTERMARKET CARBS,, TO THE STOCK MANIFOLD'S ON HEADS

# TRX70 CARB TO MANIFOLD AND MANIFOLD TO HEAD BOLTS

B81F$0.89