  |
|
 @ VALVE GUIDE SEAL 50/70/90'S ATC/TRX70'S ATC110's_TO_85 1/21M (B22H)FITS ALL Z50'S THRU 1987,, 1982 TO 1987 TOOK 2 EACH, OLDER JUST ONE.ATC70'S 1981 AND OLDER TOOK ONLY ONE GUIDE SEAL. 82 AND NEWER TOOK 2 THESE SEALS WILL WORK ON ALL THRU 83. SOME OF THE NEWER YEARS TOOK 2. BUT MOST OF THE OLDER ONES ONLY HAD 1 ON THE EXHAUST VALVE. THESE WILL ALSO FIT ALL ATC90'S AND 110'S THRU 1985 ALL C70 PASSPORTS TOOK 2 EA OF THESE SEALS |
|
|
 @ SOME READ S90_CL90_SL90 COMPLETE_GASKET_SET (READ_ABOUT_ALL CASE_GASKETS) replaces 06112-028-000 1/22M (314K) =========================================================FOR THE S90 MODELS THIS IS WHAT I HAVE FOUND: 1. HONDA CHANGED THE MAIN CASE HALF'S AT LEAST 3 TIMES FRAME # 000001 to: 441567 THEN to: 575923 THEN to: 839857 THEN HIGHER 2. HONDA CHANGED THE CLUTCH COVER/RIGHT SIDE CASE AT LEAST 2 TIMES FRAME # 000001 to: 527510 THEN to: 674102 THEN HIGHER 3. HONDA CHANGED THE LEFT CASE/ALT COVER CASE AT LEAST 3 TIMES FRAME # 000001 to: 135974 THEN to: 527510 THEN to: 645880A THEN HIGHER SO THE BOTTOM LINE IS THIS KIT IS ONLY CORRECT FOR S90'S WITH FRAME NUMBERS HIGHER THAN 527510 ========================================================= FOR THE CL90 THIS IS WHAT I HAVE FOUND THE CENTER CASES WERE CHAINGED ONCE FRAME # 000001 to: 296867 THEN HIGHER SO THE CL90'S WITH FRAME NUMBER LOWER THAN 296867 NEED THE CONVEX CASE GASKET NOT SOLD IN THIS KIT THE OTHER CASES WERE CHANGED BUT USED THE SAME GASKETS THAT ARE IN THE KIT WE SELL ON THIS PAGE ========================================================= FOR THE SL90 THIS KIT IS CORRECT FOR ALL FRAME NUMBERS ========================================================= THERE ARE WERE TWO DIFFERENT CENTER CASE GASKETS ON SOME OR ALL OF THE AVERTISED MODELS THAT THIS KIT FITS THIS GASKET SET COMES WITH THE "CONCAVE" STYLE CENTER CASE GASKET TO THE LEFT HERE IS A CONVEX TYPE NOT INCLUDED IN THIS KIT |
|