Click to enlarge

95CC_CYLINDER_KIT ADD_25_MORE_CC'S 70CC_TO_95CC UPGRADE_KIT FITS ALL_LIFAN_70'S ZONGSHEN_70'S AND_MOST_OTHER CHINA_70CC ENGINES

THIS 95CC KIT MUST BE USED WITH A HEAD FROM A 70CC ENGINE OR BIGGER!

NO Z50A Z50R XR50 CRF50 OR CHINA 50CC HEAD WILL WORK !!

1-13/1-39/1004D$139.99

BIG_BORE CASE_SET 58MM_OPENING CDI_TYPE_CASES (BBCS)BIG_BORE CASE_SET 58MM_OPENING CDI_TYPE_CASES (BBCS)ANY PART FROM A HONDA XR50 CRF50 XR70 CRF70 AND MOST ANY 50 70 90 OR 110 CLONE ENGINE PARTS WILL BOLT RIGHT ONTO THESE CASES.

THE ONLY THING THE OLDER HONDA MODELS NEED TO WATCH IS THE OIL PUMP AND STATOR SYSTEMS, THEY DIFFER FROM THE NEWER.

IF YOU JUST KNOW AND REMEMBER THESE ARE IDENTICAL CASES TO THE HONDA CRF50 OR 70 THEN YOU WILL KNOW OR CAN FIND OUT WHAT PARTS FIT..

THESE CASES WILL ACCEPT OUR 95CC CYLINDER WHICH HAS A 54MM PISTON BORE AND IS 56MM OD AT SKIRT. THESE CASES ARE MADE TO BE USED WITH A CDI TYPE IGNITION STATOR.

THESE CASES WILL ACCEPT ANY OEM HONDA 3 OR 4 SPEED TRANNY!!

OR

USE OUR TRANNY KITS WITH 3 CHOICES OF SHIFT PATTERNS

YOU CAN ALSO USE ANY HONDA AUTO CLUTCH OR MANUAL CLUTCH!!

THEY ARE STROKER CRANK READY IE 52MM STROKE WITH 95CC CYLINDER WILL PRODUCE 120CC OF KICK BUTT ROCKIN POWER!!

OUR NEW 54MM STROKER CRANK WITH THIS CASE AND THE 54MM BORE 69MM TALL CYLINDER,, WILL GIVE YOU A WHOPPING 124CC WITH HUGE HORSEPOWER.

YOUR STOCK SCREWS WILL WORK WITH THESE CASES, BUT IF YOU WANT NEW WE HAVE THEM LISTED BELOW. YOU WILL NEED 4EA 65MM 2EA 60MM AND 1EA 50MM LONG SCREWS. THE BOLTS LISTED BELOW HAVE THE 8MM HEX HEADS

BELOW ON THIS PAGE ARE SOME OTHER AVAILABLE PARTS YOU MAY WANT TO GET, DEPENDING ON WHAT YOUR DOING.

BIG_BORE CASE_SET 58MM_OPENING CDI_TYPE_CASES (BBCS) P47-RH/LH/47Bx2/289W/290A/289Y$79.99