Click to enlarge

54MM BORE PISTON KIT

13MM PISTON PIN

NOTE ! TRX90'S CANNOT USE THEY'RE STOCK HEAD'S WITH THIS PISTON KIT

NOTE ! YOU WILL NEED TO HAVE YOUR CASES dremmeled TO WORK WITH THIS CYLINDER (SEE_BELOW)

SEE THE PIC BELOW FOR ALL THE DIMENSIONS

THE HEADS WE SELL THAT WORK WITH THIS PISTON KIT ARE LISTED AT THE BOTTOM OF THIS PAGE, SCROLL DOWN PLEASE.

THIS WORKS ON TRX90'S THAT HAVE "BIG_DOME" OR "OLD_70_DOME" HEADS

HEADS FROM THE FOLLOWING WILL WORK GREAT:

OUR OLD_STYLE ULTRA_HEAD WITH_RACE_CAM (OLD_70_DOME) 25MM_INTAKE 22MM_EXHAUST

OR

XR/CRF50/70 RACE HEADS WITH 22MM AND 25MM VALVES.

CT70_K0_TO_1977

ATC70_ALL

ALL_SL70 ALL_XL70 ALL_CL70 C70M_1970/71


54MM HI_COMPRESSION RACING_PISTON (12:1/or_more) 13MM_PIN TRX90_114CC (54/GBO) 54/GBO$39.95

CLICK ON PICTURE ONCE THEN AGAIN FOR DIMENSIONS
CLICK ON PICTURE ONCE THEN AGAIN FOR DIMENSIONS


CLICK ON PICTURE ONCE THEN AGAIN
CLICK ON PICTURE ONCE THEN AGAIN


CLICK ON PICTURE ONCE THEN AGAIN
CLICK ON PICTURE ONCE THEN AGAIN


CLICK ON PICTURE ONCE THEN AGAIN
CLICK ON PICTURE ONCE THEN AGAIN


CLICK ON PICTURE ONCE THEN AGAIN
CLICK ON PICTURE ONCE THEN AGAIN


CLICK ON PICTURE ONCE THEN AGAIN
CLICK ON PICTURE ONCE THEN AGAIN


HEAD_DOME'S_? RODS_LONG/SHORT_?  WHICH_DO_I_HAVE_?
HEAD_DOME'S_? RODS_LONG/SHORT_? WHICH_DO_I_HAVE_?


Click to enlarge
THESE ARE THE AREA'S TO BE TRIMMED FOR THE 54MM CYLINDER


Click to enlarge
MUST REMOVE SOME ALUMINUM HERE FOR 54MM CYLINDER

(NOTE YOU DON'T HAVE TO SPLIT YOUR CASES THIS IS JUST FYI)


Click to enlarge
MAKE SURE TO SLIDE CYL. DOWN STUDS TO CHECK FOR CLEARANCE

(NOTE YOU DON'T HAVE TO SPLIT YOUR CASES THIS IS JUST FYI)


Click to enlarge
SLIDE BARE CYLINDER DOWN STUDS AND MAKE SURE ALL IS FLUSH