Click to enlarge

10MM_HIGH_SPACER  "22MM_ID" PIPE_TO_HEAD (300028)

THIS WILL ALLOW THE BIGGER CARBS TO CLEAR THE CYLINDER WHEN USING THE 18,20 OR 25MM CARBS AND THE SHORT 22MM MANIFOLD , ALSO HELPS GET THE CARB AWAY FROM THE CYLINDER HEAT.

THIS IS 10MM THICK , THE CENTER HOLE IS 22MM AND CENTER TO CENTER ON BOLTS ARE 44MM.

300028$6.95

*GASKET INTAKE_TO_HEAD CT70KO/77 ALL_SL/XL70'S (all_ct110's) 1/16M (31B) *GASKET INTAKE_TO_HEAD CT70KO/77 ALL_SL/XL70'S (all_ct110's) 1/16M (31B) THIS GOES CLOSEST TO THE HEAD ON THE INTAKE SIDE. FITS KO THRU 1977. and all atc70's 22MM CENTER

44MM BOLT PATTERN

ALL HOLES ARE CENTERED

all SL AND XL70'S TAKE 2 ONE ON BOTH SIDES OF THE INSOLATER

*GASKET INTAKE_TO_HEAD CT70KO/77 ALL_SL/XL70'S (all_ct110's) 1/16M (31B) 31B$3.19